Home » Accessories & Parts

Products

Accessories & Parts

Control Panel

View All

Control Panel

Wi-Fi Gateway

90002-0001

For use with Pivot Pro and LPS control panels. Connect Z Control® Enabled Zoeller Products to the Z Control® Cloud. Use this Gateway with compatible products such as the Pivot Pro Series, Pivot Pro+ Series, and Low Pressure Sewer System...

Control Switches

50′ Narrow Angle Level Control Switch

10-1883

The narrow angle control float switch allows you to adjust the on/off points in the basin optimizing pump run time. The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety...

Control Switches

25′ Variable Level Control Switch

10-1877

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time. The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...

Control Switches

15′ Variable Level Control Switch

10-0743

Control Panel

20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank. Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

Control Switches

25′ Narrow Angle Level Control Switch

10-1881

Basins

View All

Basins

PSF Extension for 18×30 Basin (6″ Tall)

31-1476

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on our 18 x 30 basin.

Basins

PSF Extension for 18×30 Basin (12″ Tall)

31-1473

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on our 18 x 30 basin.

Basins

Outdoor Tank Vent

10-1753

The 2" mushroom vent is a great addition to your basin cover where a vent is required by code for your system.

Basins

Fiberglass Extension for 18×30 Dia Basin (6″ Tall)

31-0566

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on fiberglass basins.

Basins

Fiberglass Extension for 18×30 Basin (12″ Tall)

31-0558

This extension increases the basin height by 12” to allow deeper burial for longer pitched pipe runs. This is designed to fit on fiberglass basins.

Basins

24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

Z-Rail® Rail Systems

Z-Rail® Rail Systems

3″ Z-Rail® Disconnect System

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Accessories & Parts

2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Z-Rail® Rail Systems

1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Check Valve

View All

Accessories & Parts

4″ Flanged Check Valve

6030-0203

The 4" flanged check valve is designed for sewage applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

3″ Cast Iron Full-Flow Unicheck

30-0160

The 3" cast iron full flow unicheck is designed for basement sump pump, effluent, sewage, and stormwater removal applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Unicheck Cast Iron Check Valve

30-0151

The 2" unicheck cast iron check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Combo Check Valve

30-0103

The 2" combo check valve is designed for sewage, effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Control Valve

Accessories & Parts

3″ Threaded Plug Valve

6030-0083

The 3" threaded plug valve is designed for effluent or sewage applications to allow pump isolation. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Tri-Check® Valve

30-0101

Accessories & Parts

2″ (3-Way) Ball Valve

30-0248

The 2" (3-way) ball valve is designed for effluent applications to allow pump isolation. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Alarms

View All

Accessories & Parts

Z Control® APAK® Indoor Alarm With Reed Sensor

10-4013

The Indoor Z-Control APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin. The system comes with a 15' reed sensor-style float switch and 6' power cord.

Accessories & Parts

Z Control® APAK® Indoor Alarm With Mechanical Float

10-4014

The Indoor Z-Control APak® Alarm System provides an audible and visual warning in the event of high liquid in the pump basin. The system comes with a 15 ' mechanical float switch and 6' power cord.

Accessories & Parts

Standard APak® Outdoor Alarm System With Mechanical Float

91104-0001

The Outdoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin. The NEMA 4X enclosure ensure that it can withstand changing weather conditions. The system comes with a 15' variable level...

Accessories & Parts

Standard APAK® Indoor Alarm With Mechanical Float

10-4012

The Indoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin. The system comes with a 15' mechanical float switch and a 6' power cord.

Accessories & Parts

Standard APAK® Indoor Alarm With Reed Sensor

10-4011

The Indoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin. The system comes with a 15' reed sensor-style float switch and a 6' power cord.

Accessories & Parts

High Water Qwik Alarm™

10-5090

Battery powered alarm for use with the Qwik Jon® Premier that sounds when the water level in the tank is too high. Easy to install on new or existing Qwik Jon Premier units.

Switches

View All

Control Switches