The Oil Smart® Duplex Control Panel is designed to help protect the environment from the dispersion of oils and/or hydrocarbons. The panel comes with an Oil Smart® Pump Switch, Oil Smart® Alarm Switch and Oil Smart® High Liquid Switch. The duplex panel is capable of 115/200/230 V pumps up to 16.0 FLA while meeting elevator code ASME A17.1.
The Oil Smart® Pump Switch uses sensor probes made of high quality 304 stainless steel. These probes can distinguish between oil and water allowing the pump to only operate when sensing water. The probes call for the pump to run when they sense water and turn off when sensing oil or air. The Oil Smart® Alarm Switch has two probes that can distinguish between oil or water during high liquid levels. This will signal the panel to send out an audible alarm. Simultaneously, a red beacon will illuminate as an early warning of a problem and 1 of 2 other indicator lights will illuminate. On the face of the panel either a yellow light will illuminate for high oil or a white light for high water. There are dry contacts for each of these lights.
An Oil Smart® High Liquid Switch will active the 2nd pump in the event the liquid level rises to that point. The pump will come on with both pumps operating until the water hits its off point. Once off, the system will go back to its normal duplex pumping operation.
Save on costly fines or cleanup cost with the protection that the Oil Smart® provides.